Very soon we will be busy vanishing when choosing textile toys for a gift for Christmas and New Year or simply preparing the decor of your home in honor of this holiday.
In this master class we suggest you create a wreath in the style of Tilde with his own hands. To do this, we need some material that we can buy at any handicraft store.
In order to make tilda wreath for Christmas we need to prepare three small pieces of cotton fabric, tape "bindweed", hard cardboard, threads, filler, narrow ribbons, large wooden buttons, threads.
On paper, draw a pattern of the panel (the figure shows half), a heart, patterns and flowers of a smaller and larger size.
Cut the patterns. Consider it and try to understand, how to sew a tilde wreath.
From the cardboard we cut out two curves for a large and small flower. First, we cut out a large scale. Then we cut the line
pattern and on the cardboard we shall transfer a contour of a small pattern.
For our panel it is necessary to cut out four cardboard blanks according to a large pattern and six cardboard blanks according to a small pattern. In the end we need ten cardboard circles.
Take solid cardboard for the panel itself. We lay out half on a cardboard. Pencil outline the contour.
Then we apply the second half and also redraw it on the cardboard.
We got a circle. Billet for the panel.
Cut out the workpiece.
The fabric is folded in two layers. Apply the templar.
Chalk draw the contour of the panel.
We cut out the details of the panel with small allowances. We leave the inner part. On the outer edge of the workpiece we sew off a closed machine stitch.
On the width of the seam with the tips of the scissors we make notches.
Cut the inner circle, leaving the allowance for the seam.
We grind the parts on the inside.
On the seam, too, we'll make an incision.
From the stitching seam mark 4cm to the center.
We cut the top part along the planned line. The bottom remains intact.
We turn the panel on the front side. Sutures straighten and iron them.
In the middle we insert a cardboard blank.
By hand stitches we begin to sew the cut.
Stitching 10-15cm gradually fill the panel with sintepon. Syntepon plant under the cardboard.
At the end, cut the cardboard blank across and fold its cut into a cut, as shown in the figure.
This is how our circle looks like for a panel.
We take a pattern for a large flower. We need four large mugs. Fold the fabric in two layers.
We prick the pattern.
With a chalk, we move the outline of the patterns to the fabric.
Cut the mugs without allowances.
From the wrong side for each cut out circle we put a large scale.
On the outer cut for the assembly by hand stitches, we make a line through the edge.
We pull the thread on the assembly.
Lightly fill the flower with sintepon.
We fasten several stitches of the assembly.
In the center of each flower we sew a button.
That's right at this stage, we will be a little interrupted. We will continue our work already together with the second part of the master class - https://masterclassy.ru/tilda/master-klass-tilda/6304-rozhdestvenskiy-venok-v-stile-tilda-master-klass-chast-2.html